View source for Fusion360 Tutorials

=Beginner=
==by Product Design Online==
* [https://www.youtube.com/watch?v=qvrHuaHhqHI Fusion 360 Tutorial for Absolute Beginners (2020)] - Create a stamp tool
** Good pace, clear instructions.  For a beginner in F360 but with experience in other programs, some questions of "how did you know to do that?" came up for me. Example, you can't sketch in blank space and in order to create the handle ends, you create an additional plane, offset, to the first plane, then add the circle end to that (prior to Fillet).  
* [https://www.youtube.com/watch?v=XC-6AQksxHY Fusion 360 Tutorial for Absolute Beginners (2020) — Project #2 - Create a book holder]
===30 Days===
'''Note:''' Attempting to render and post to this collection when completed: https://imgur.com/gallery/m5yrdDL <br>
# [https://www.youtube.com/watch?v=6yPKMSb6ja8&list=PLrZ2zKOtC_-DR2ZkMaK3YthYLErPxCnT-&index=4&t=0s Lego] Brick (see notes)
#* shell (hollow), extrude, pattern (rectangle) duplication, circle, line (draft)
# [https://www.youtube.com/watch?v=4CB-FB_KoDs&list=PLrZ2zKOtC_-DR2ZkMaK3YthYLErPxCnT-&index=4 Beer] Bottle
#* reference image, fit point spline, revolve, glass appearance
# [https://www.youtube.com/watch?v=p-raTJt0KPw&list=PLrZ2zKOtC_-DR2ZkMaK3YthYLErPxCnT-&index=5 Paper] Clip
#* Line, sketch fillets, sweep (from sketch profile)
# [https://www.youtube.com/watch?v=pqXCswoa3F4&list=PLrZ2zKOtC_-DR2ZkMaK3YthYLErPxCnT-&index=6 Whiskey] Bottle
#* Offset planes, loft, loft guide rails, construction sketch lines, shell (hollow), threads (check model if printing), rectangle (centered)
# [https://www.youtube.com/watch?v=M9LCCwP0tTg&list=PLrZ2zKOtC_-DR2ZkMaK3YthYLErPxCnT-&index=7 Ice] Cube Tray
#* Sketch dimensions, extrude cut, rectangular pattern features
# [https://www.youtube.com/watch?v=Xho87HJ-XDo Hex] Nut
#* polygon sketch tool, create a midplane, use the mirror feature, and use the hole feature

===Misc===
* [https://www.youtube.com/playlist?list=PLrZ2zKOtC_-D9cw3tL_XgUen2dsnZx06l PDO Playlist]

==Notes==
* Constraints
** Horizontal\Vertical - make line(s) the same length.  Click the H\V, then the end point of the line to be changed, then the reference point.
* If tangent circles don't show up: [https://forums.autodesk.com/t5/fusion-360-design-validate/auto-project-preferences/td-p/6836409 Auto Project Preferences]
** Turn on ''Auto project edges on reference'' and turn off ''Auto look at sketch''
** You'll need this on the [https://www.youtube.com/watch?v=6yPKMSb6ja8&list=PLrZ2zKOtC_-DR2ZkMaK3YthYLErPxCnT-&index=4&t=0s Lego Brick] Tutorial
* If you can't select a circle\surface\etc, make sure it is flat (see Constraints)
** Could not select the top of the beer bottle

[[Category:3D Printing]]