VoiceMeeter Setup

References

• OCGineer.com
• Reddit/9szkku

Drivers

• Install VBCABLE_Driver_Pack43
• Install VBCABLE_A_Driver_Pack43
• Install VBCABLE_B_Driver_Pack43
• Install HiFiCableAsioBridgeSetup_v1007
• Reboot

Misc

• Verify the following are the same: 16bit 44100 for Playback and Recording in the sound panel
• So they are accessible if needed, consider copying VBCABLE_ControlPanel.exe from each dir and
  • rename to VBCABLE_ControlPanel_A or _B as applicable
  • move to C:\Program Files (x86)\VB\

Hardware

Recording

Note: Recording only through a USB connected device

• Show Disabled Devices
• Disable Dock Mic
• Disable Jack Mic
• Disable Microphone Array
• Plug in USB Microphone
  • Verify connectivity
  • Check Settings:
    • Listen: Off
    • Custom: AGC Off
    • Levels: 50
    • Adv: 1 channel 16bit 44100Hz

Playback

Note: Playback via the headphone jack only

• Disable C-Media USB (Microphone)
• Disable Speakers/Headphones
• Set Default Device: Communications Headphones

Notes

• Playback naming convention:
  • Cable Input
  • Cable A Input
  • Cable B Input
  • Hi-Fi Cable Input
  • VoiceMeeter Aux Input <Aux In>
  • VoiceMeeter Input <Desktop In>
• Recording naming convention:
  • Cable Input
  • Cable A Output
  • Cable B Output
  • Hi-Fi Cable Output
  • VoiceMeeter Aux Output <Aux In>
  • VoiceMeeter Output <Desktop In>

Output Path

• A1: Headphones\Speakers
• A2: Recording
• B2: Export to <program>

Note: CURRENTLY A3-> out to Skype (Cable A Output (VB-Audio Cable A)) --Rabbi Bob (talk) 10:12, 13 April 2019 (EDT)

Software

• Install VoicemeeterProSetup
  • Reboot
• "C:\Program Files (x86)\VB\Voicemeeter\VBVMAUX_ControlPanel.exe"
  • Change Internal Sampling to 44100 if not already
  • Reboot if needed

Hardware Output

• Click A1 and select output: WDM Communications
  • Suggestion: have headphones plugged in or get feedback

Hardware Input 1

• Rename to Microphone
• Select Input Device: WDM - <USB Microphone>

Hardware Input 2

• Rename to VoIP Input
• Send to A1
• Send to B2
• Set select Input Device: WDM - VB-Audio Output (Cable 0)
  • Note: This will go in VoIP program

VoiceMeeter Viao

• Rename to Soundboard In
• Send to A1
• Send to B2

==VoiceMeeter Aux

• Rename to Desktop In
• Send to A1
• Send to B2

Soundboard

• set audio playback to
  • WDM
  • VoiceMeeter Input

Skype

• VoiceMeeter A3 Hardware Output -> Cable A
• SKype Audio
  • Microphone: Cable A Output (VB-Audio Cable A)
  • Speakers: Cable Input (VB-Audio Virtual Cable)