Distant Screws II Challenge Coin: Difference between revisions
From Mike Beane's Blog
mNo edit summary |
mNo edit summary |
||
| Line 3: | Line 3: | ||
[[File:DS2-Heads.jpg]][[File:DS2-Tails.jpg]] | [[File:DS2-Heads.jpg|thumb]][[File:DS2-Tails.jpg|thumb]] | ||
==ReadMe== | ==ReadMe== | ||
A how-to for printing the 3D LS DS II Challenge Coin for anyone that was on the 2021 Distant Screws II Expedition. | A how-to for printing the 3D LS DS II Challenge Coin for anyone that was on the 2021 Distant Screws II Expedition. | ||
| Line 33: | Line 33: | ||
w/ Blender 2.9.x | w/ Blender 2.9.x | ||
==Download== | ==Download== | ||
* Download: [http://www.rabbibob.com/cstrike/ED/LSN%20DISTANT%20SCREWS%20II%20COIN.zip Zip file] | * Download: [http://www.rabbibob.com/cstrike/ED/LSN%20DISTANT%20SCREWS%20II%20COIN.zip Zip file] | ||
Revision as of 11:18, 3 March 2021
About
Place holder page
ReadMe
A how-to for printing the 3D LS DS II Challenge Coin for anyone that was on the 2021 Distant Screws II Expedition.
The front-side features the classic LS Logo, the expedition name, dates and the waypoint distances traveled.
The backside features the four points of the journey (ROSS310-EVELYNS LIGHT-COLONIA-QAMA) and a star to honor Evelyn Faye Roy.
Printing Suggestions
Scale to 60mm x 60mm x 8mm (or 10mm)
Super Quality
No Infill
1) With trees: On an edge - will require sanding and clean up. 2) In halves:
Duplicate the STL on the bed
Sink both below the bed to 1/2 the Z width (-4mm or -5mm)
Flip one of the faces
Print
Glue together
Sand edge as needed with 220g and 500+
Created by RabbiBob 3/1/2021 w/ Blender 2.9.x
Download
- Download: Zip file