Actions

Sansa e250 unbrick

From Mike Beane's Blog

Revision as of 23:34, 26 September 2008 by Rabbi Bob (talk | contribs) (New page: Had to fight with my Sansa tonight and I thought it was bricked. Did some reading and fiddling, then I went over to Rockbox and read their steps on unbricking. Result? Worked right off...)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Had to fight with my Sansa tonight and I thought it was bricked.

Did some reading and fiddling, then I went over to Rockbox and read their steps on unbricking. Result? Worked right off the bat.

http://www.rockbox.org/twiki/bin/view/Main/SansaE200Unbrick

My short steps for reference:


  1. Turn the HOLD button ON
  2. Turn on the unit and hold RECORD until USB Recovery Mode starts
  3. Plug into USB
  4. Open the 16MB Drive (My computer)
  5. Copy the original firmware back to this drive
  6. Unplug from USB
  7. Turn the HOLD button OFF

Firmware (pp5022.mi4) can be found here:

http://daniel.haxx.se/sansa/mi4.html

Retrieved from "https://www.mikebeane.com/index.php?title=Sansa_e250_unbrick&oldid=854"